Home > Movie/TV Categories > Terminator Collectibles

Also see:
• Alien & Predator Collectibles
• Marvel Collectibles
• Search page
• Categories main page

Description: When Hollywood Collectibles decided to create a line of bobbleheads they didn't want to just produce your average bobblehead. They have invested the same time and care into their bobbleheads as would normally be devoted to much more expensive statues. The result is the stunning attention to detail that lifts the quality of these bobbleheads to a new level. So think of them not as "novelty" bobbleheads but as small statues - with oversized heads! The Endoskeleton stands approx. 8" tall and is constructed from resin, and individually hand painted to the smallest detail.

Description: When Hollywood Collectibles decided to create a line of bobbleheads they didn't want to just produce your average bobblehead. They have invested the same time and care into their bobbleheads as would normally be devoted to much more expensive statues. The result is the stunning attention to detail that lifts the quality of these bobbleheads to a new level. So think of them not as "novelty" bobbleheads but as small statues - with oversized heads! Each Terminator bobblehead stands approx. 8" tall and is constructed from resin, and individually hand painted to the smallest detail.

Description: When Hollywood Collectibles decided to create a line of bobbleheads they didn't want to just produce your average bobblehead. They have invested the same time and care into their bobbleheads as would normally be devoted to much more expensive statues. The result is the stunning attention to detail that lifts the quality of these bobbleheads to a new level. So think of them not as "novelty" bobbleheads but as small statues - with oversized heads! Each Terminator bobblehead stands approx. 8" tall and is constructed from resin, and individually hand painted to the smallest detail.

Description: When Hollywood Collectibles decided to create a line of bobbleheads they didn't want to just produce your average bobblehead. They have invested the same time and care into their bobbleheads as would normally be devoted to much more expensive statues. The result is the stunning attention to detail that lifts the quality of these bobbleheads to a new level. So think of them not as "novelty" bobbleheads but as small statues - with oversized heads! The T800 stands approx. 8" tall and is constructed from resin, and individually hand painted to the smallest detail.

Description: When Hollywood Collectibles decided to create a line of bobbleheads they didn't want to just produce your average bobblehead. They have invested the same time and care into their bobbleheads as would normally be devoted to much more expensive statues. The result is the stunning attention to detail that lifts the quality of these bobbleheads to a new level. So think of them not as "novelty" bobbleheads but as small statues - with oversized heads! The T1000 stands approx. 8" tall and is constructed from resin, and individually hand painted to the smallest detail.

Description: When Hollywood Collectibles looked at their Xtreme Dform line to see how they could improve them, it was a difficult task. They were already pretty cool, so they did the only thing they could - SUPERSIZED them! Now your favorite movie Icons are available Supersized - each an imposing 9" tall! The Supersized Xtreme Dform statues are still made from hand painted heavyweight resin rather than PVC, as a real statue should be. This allows the attention to detail that collectors desire while still being an economical, fun line to collect.

Description: When Hollywood Collectibles looked at their Xtreme Dform line to see how they could improve them, it was a difficult task. They were already pretty cool, so they did the only thing they could - SUPERSIZED them! Now your favorite movie Icons are available Supersized - each an imposing 9" tall! The Supersized Xtreme Dform statues are still made from hand painted heavyweight resin rather than PVC, as a real statue should be. This allows the attention to detail that collectors desire while still being an economical, fun line to collect.

Description: Sculpted by Jack Mathews.
All busts are hand-painted, cold-cast in porcelain, feature a base incorporating both human and Terminator skulls and are packaged in a 4-color box.

Description:Sculpted by Mike Locascio.
All busts are hand-painted, cold-cast in porcelain, feature a base incorporating both human and Terminator skulls and are packaged in a 4-color box.

Description:Sculpted by Oliver Brig.
All busts are hand-painted, cold-cast in porcelain, feature a base incorporating both human and Terminator skulls and are packaged in a 4-color box.

Description: Nearly 10 years have passed since Sarah Connor was targeted for termination. Again Skynet attempts to disrupt the future and win its conflict with humans by changing the past. It targets the teenage John Connor, future leader of the resistance, with a newer, more deadly Terminator. Once again, the resistance has managed to send a protector back to attempt to save John and his mother Sarah. Click here for more info and images.

Description: Sideshow Collectibles is proud to debut the first ever adult John Connor! Over the past 15 years, T2 has gained modern classic status, and cemented the Terminator franchise amongst the best of the science-fiction and action/adventure film genres. Sideshow is pleased to continue this series of extremely limited edition 1:6 scale busts with this limited and exclusive release of the John Connor Bust. Each high quality bust is cast in polystone, then hand-finished and hand-painted, and is limited to only 1,000 pcs worldwide.

Description: From the legendary Terminator 2: Judgment Day feature film, this Ultimate Quarter-Scale release features the near-unstoppable Arnold Schwarzenegger T-800 model sent back in time to protect John Connor and save the world from his fellow Terminators. Measuring 19-inches tall with over 23 points of articulation, the figure includes sound effects clips from the iconic film. With the included accessories and display stand you can let the world know what side you're really on!

Description: Reel Collectibles and Hot Toys are proud to bring you the first piece in the Hot Toys Terminator Salvation lineup - the Terminator Factory: T-700 Diorama. This diorama captures the T-700 assembly line building an army of cyborgs. True to 1:6th scale, the T-700 Diorama stands approximately 15 inches tall and features light-up eyes and a light-up button on the manufacturing machine. Each diorama base features a Terminator Salvation logo.

Description: Showing the T-800 (Played by Arnold Schwarzenegger) in his battle damaged form with a gun in one hand... and well, no other hand. a great piece.

Description: Hot Toys is pleased to present the 1/6th scale Sarah Connor collectible figure from the Terminator 2: Judgment Day movie. The movie-accurate Sarah Connor collectible is specially crafted based on the image of Linda Hamilton in the movie, highlighting the newly sculpted head and muscular arm, as well as detailed hair sculpture. The 1/6th scale Sarah Connor specially features:
General: Authentic and detailed fully realized likeness of Linda Hamilton as Sarah Connor in the movie Terminator 2 • Newly developed muscular rubber arm which enhances her forcefulness • Detailed hair sculpture divided into 2 parts (fringes and middle part with ponytail attached) • Two detachable and interchangeable fringes (one hanging over the forehand; another with middle borderline) • 28 points of articulations • Two pairs of interchangeable palms (one pair of relaxed palms; one pair for holding guns) • Two extra right palms (one for holding knife and one for cigarette) • Each piece of head sculpt is specially hand-painted
Costume: Enhanced tactical load bearing vest with four magazine pouches • Tank top • Pants with tactical belt and pouches • Combat Boots • Cap • Wristband • Sunglasses
Weapons: Assault rifle with silencer • Shotgun with folding stock • Pistol • Combat knife with leather sheath
Accessories: Cigarette • Figure base with Sarah Connor nameplate and the movie logo.

Description: A Half scale Endoskeleton skull with LED lights emmiting from his eyes, and the plaque, a truely remarkable Termintor piece. This version is a battle damaged version, as if the endoskeleton has engaged in combat.

Description: A Half scale Endoskeleton skull with LED lights emmiting from his eyes, and the plaque, a truely remarkable Termintor piece.

Description: Hot Toys is proud to present the 1/6th scale T-1000 in Sarah Connor disguise Collectible Figure from the Terminator 2: Judgment Day movie. The movie-accurate Sarah Connor collectible is specially crafted based on the image of Linda Hamilton, which is disguised by T-1000 in the movie, highlighting the newly sculpted head, hair implantation and specially designed figure stand. The 1/6th scale T-1000 in Sarah Connor disguise Collectible Figure specially features:
General: Authentic and detailed fully realized likeness of Linda Hamilton as Sarah Connor disguised by T-1000 in the movie Terminator 2 • Newly sculpted head with movie-accurate facial expression, detailed wrinkles and skin texture • Real fabric hair implantation in blonde long straight hair style • Muscular rubber arm enhancing her forcefulness • Detachable magnetic bullet holes at waist and on the back • Approximately 28 cm tall • 28 points of articulations • Two pairs of interchangeable palms - one pair of relaxed palms; one pair for holding guns • Two extra right palms - one for holding knife and one for cigarette
Costume: Enhanced tactical load bearing vest with four magazine pouches • Tank top • Pants with tactical belt and pouches • Combat Boots • Another pair of metal-like boots melted and attached to figure stand • Wristband
Weapons: Shotgun with folding stock • Pistol • Combat knife with leather-like sheath
Accessories: Cigarette • An additional T-1000 bullet damaged head as bonus accessory •Newly developed and specially designed convertible square-shaped figure stand with four extra triangles which can be attached to the four sides of square to build a larger stand OR the four triangles can be put together to form another square-shaped stand.

Description: This incredibly detailed cyborg figure is true to 1:6th scale, standing approximately 13.8 inches high, and features over 30 points of articulation and the authentic likeness of Arnold Schwarzenegger as T-800. The T-800 figure is the perfect addition to any collection.
The T-800 12 inch Figure features:
General: Authentic and detailed fully realized likeness of Arnold Schwarzenegger as T800 in the movie Terminator 2 • Newly developed rubber upper body with PVC material limbs, further stands out the muscular body  and which also highly imitates the genuine Arnold one in the T2 movie • Stands even taller with approximately 32 cm height • Over 30 points of articulations • Two pairs of interchangeable palms - a pair of punches and a pair of relaxed palms plus one right palm for holding the shotgun • An interchangeable left forearm featuring bloody and articulated endoskeleton • Each piece of head sculpt is specially hand-painted
Costume: Costume of black leather-like jacket and pants, grey-color T-shirt and black-color boots which imitates his style in the movie • A leather-like belt with buckle
Weapons: A pistol • A shotgun
Accessories: Gold-color rose box with a bunch of 6 red roses • Black-lens sunglasses with black-color frame • Figure base with T800 nameplate and the movie logo.

Description: Hot Toys is proud to present the 1/6th scale T1000 Collectible Figure from the Terminator 2: Judgment Day movie. The T1000 collectible is specially crafted based on the image of Robert Patrick in the movie, highlighting the newly sculpted head, two styles of costume, highly detailed weapons and bonus accessories. The 1/6th scale T1000 Collectible Figure specially features:
General: Authentic and detailed fully realized likeness of Robert Patrick as T1000 in the movie Terminator 2 • Movie-accurate facial expression with detailed wrinkles and skin texture • An interchangeable damaged head broken into two halves • Dark brown colored hair sculpture • Approximately 30 cm tall • TrueType body with over 30 points of articulations • Four pairs of interchangeable palms including - One pair of open palms - One pair of relaxed palms - One pair for holding guns - One right pin palm - One left palm with pointing forefinger • Each piece of head sculpt is specially hand-painted
Costume: One dark blue police officer shirt with badge • One pair of dark blue police officer pants • One black zip-up highway patrol officer jacket with badge • One pair of dark blue highway patrol officer pants with white stripes on both sides • One pair of leather-like black shoes • One pair of leather-like black boots • One leather-like black buckled belt • One leather-like black buckled police belt with pouches for pistol, magazines, walkie talkie and handcuffs; and torch holder
Weapons: One pistol • One submachine gun • Two packs of magazines • One pair of metal-like handcuffs • One pair of metal-like hook arms • One metal-like blade arm • Three small-size, two medium-size and two large-size (each made of two medium-size) detachable magnetic bullet hits
Accessories: One pair of sunglasses • One helmet • One torch • One walkie talkie • One ball pen Figure stand with T1000 nameplate and the movie logo.

Description: Hot Toys is proud to bring you the latest T600 figure from the Terminator Salvation movie, this early Terminator Infiltrator stands approximately 35 cm / 14 inches high, and true to 1:6th scale. The easy recognized and weathered T-600 also features:
Over 25 points of articulations • Removable and simplistic rubber mask, non-removable gloved hands and boots • Tattered clothing to hide its endoskeleton • Eye light up function ( cell button battery operated- battery included) • Accessories includes Grenade Launcher, Gatling Gun and Ammo Pack with harness • Environmental and skulls featured display base.

Description: From the sci-fi classic 'Terminator 2: Judgement Day', the T-800 Statue is a stunning representation of Arnold Schwarzenegger as the legendary cyborg. Each piece is individually painted and finished, each with its own unique quality and detail that is the trademark of a handcrafted Sideshow Collectibles product. The T-800 Statue is an outstanding representation of the T2 hero, a stunning addition to any display.

Description: The T-800 Premium Format figure is a stunning 1:4 scale museum quality piece. Grenade launcher in hand, the Terminator stands 22 inches tall atop the display base. Each piece is cast in high-quality polystone, then hand-painted and hand-finished. The figure is dressed in an amazing miniature replica of the costume constructed of real fabrics, and the base is individually hand-numbered for authenticity. This stunning figure is the ultimate representation of T-800, an outstanding addition to any collection.

Description:Sideshow Collectibles and Legacy Effects are proud to bring you the T-700 Life-size Bust from the blockbuster film 'Terminator Salvation'. The T-700 Life-size Bust features light-up eyes and a textured endoskeleton finish, true to original designs. Each piece is individually handcrafted and finished to exacting standards, each with it's own unique quality and detail that is the trademark of a handcrafted Sideshow Collectibles product. The T-700 Life-Size Bust is a truly outstanding addition to any display.

Description: To celebrate the 15th Anniversary of this modern classic film, Sideshow Collectibles and Stan Winston Studios have partnered to create the T-800 Endoskeleton Life-Size Bust. For the first time ever, the Endoskeleton skull has been reproduced with complete authenticity to the film by the same artists that created the Endoskeleton for the film. The Endoskeleton Life-Size Bust features electronic, light-up eyes and a removable CPU microchip replica. The Combat Veteran version of the bust features a weathered paint application. The T-800 Endoskeleton Life-Size Bust is the perfect centerpiece for your T2 collection - don't miss your opportunity to order!

Description: Sideshow Collectibles and Legacy Effects are proud to bring you the T-600 Life-Size Bust from the Terminator Salvation film. Sideshow's team collaborated with Legacy Effects to create this incredibly detailed cyborg from the original screen-used robotic prop, capturing the raw power of the T-600 endoskeleton. Each piece is individually painted and finished to exacting standards, each with its own unique quality and detail that is the trademark of a handcrafted Sideshow Collectibles Life-Size Bust. The bust is crafted of polystone, fiberglass, metal and other materials to best recreate the T-600 as authentically as possible. LED light-up eyes add an ominous realism, powered by the supplied power cord and wall plug (U.S. only) or battery operated (batteries not included). The T-600 Life-Size Bust is an absolute must-have for any fan of this outstanding film saga and a perfect addition to any display.

Description: From the sci-fi classic 'Terminator 2: Judgement Day', Sideshow Collectibles is proud to bring Terminator collectors the T-800 Endoskeleton - Version 2.0, standing atop an impressive display base littered with human skulls and debris. Standing over 6 feet tall, the T-800 Endoskeleton is high quality polystone, fiberglass, metals and other materials, complete with light-up eye features (power cord/plug-in). The T-800 Endoskeleton - Version 2.0 is a stunning and imposing piece, sure to become the centerpiece to any collection or display.